Dell Force10 Software Defined Networking User Manual

Vlan List :
Vlan Mbr list :
Usage
Information
Use the show openflow command to display general information such as version,
capabilities, and supported actions.
Related
Commands
openflow of-instance Create or modify an OpenFlow instance.
show openflow flows
Display detailed information about OpenFlow instances.
Z-Series, S4810
Syntax
show openflow flows[of-instance{of-id}][table{acl|lb|mac|route|
vlan}flow-id{flow-id}]
Parameter
of-instance of-id Enter the keyword of-instance followed by the OF instance ID to
display details of all flows installed for the specified OF instance.
Range is 1 to 8.
table acl | lb |
mac | route | vlan
flow-id flow-id
Enter the keyword table followed by the table type and the keyword
flow-id followed by the flow ID to display details for the specified
flow:
acl Display ACL table information.
lb Display learning bridge table information.
mac Display MAC table information.
route Display routing table information.
vlan Display VLAN table information.
Defaults None
Command Modes EXEC
Command History
Version 9.1(0.0) Introduced on Z9000 and S4810.
Related
Commands
show openflow Display general information about OpenFlow instances.
shutdown (OpenFlow Instance)
Enable or disable the OpenFlow instance.
Z-Series, S4810
Syntax
[no] shutdown
35

Dell Force10 Software Defined Networking Specifications

General

Product Type	Switch
Category	Software Defined Networking
Compatibility	OpenFlow
Port Density	Varies by model
Forwarding Capacity	Varies by model
Latency	Varies by model
Power Consumption	Varies by model
Product Family	Force10