Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, and the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 26. Screw list
Component Screw type Quantity Screw image
Base cover M2x4 5
Base cover Captive screws (M2x8.6) 2
Battery M2x3 4
M.2 2230 solid-state drive and
M.2 thermal shield
M2x3 1
M.2 2280 solid-state drive and
M.2 thermal shield
M2x3 1
M.2 thermal shield M2x1.8 1
Fan M2x3 2
Wireless-card bracket M2x3 1
Power-button with an optional
fingerprint reader
M2x3 1
Type-C port bracket M2x4 2
Display assembly M2.5x5 4
I/O board M2x3 2
USB board M2x3 1
System board M2x1.8 2
Touchpad M2x1.8 4
Touchpad M2x2.5 5
Working inside your computer 31
To Next Page
Loading...
