7. Remove the display assembly.
About this task
The following image indicates the connectors and M.2 card slots on your system board.
Figure 36. System board callouts
1. Fan cable connector
2. Display-assembly cable connector
3. Power-adapter port cable connector
4. I/O-board and USB-board cable connector
5. M.2 wireless-card slot
6. Touchpad cable connector
7. Keyboard cable connector
8. Speaker cables connector
9. Keyboard-backlight cable connector
10. Battery cable connector
11. M.2 solid-state drive slot
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
66
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
