Figure 39. Installing the system board
Steps
1. Place the system board on the palm-rest and keyboard assembly.
2. Align the ports on the system board with the ports on the palm-rest and keyboard assembly.
3. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x1.8) that secure the system board to the palm-rest and keyboard assembly.
5. Place the Type-C port-bracket on the system board and align the screw holes of the Type-C port-bracket with the screw
holes on the system board.
70
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
