Table 29. System setup options—Overview menu(continued)
Overview
Microcode Version Displays the microcode version.
Intel® Hyper-Threading Capable Displays whether the processor is Hyper-Threading (HT) capable.
64-Bit Technology Displays whether 64-bit technology is used.
MEMORY
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
Memory Channel Mode Displays single or dual channel mode.
Memory Technology Displays the technology that is used for the memory.
DEVICES
Panel Type Displays the panel type of the computer.
Panel Revision Displays the panel revision of the computer.
Video Controller Displays the integrated graphics information of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the Wi-Fi device installed in the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth® Device Displays whether a Bluetooth device is installed in the computer.
Table 30. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of this computer.
Boot Sequence Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, Windows Boot Manager is selected.
By default, UEFI Hard Drive is selected.
Secure Digital (SD) Card Boot
Enable Secure Digital (SD) Card Boot Enable or disable booting from a Secure Digital (SD) card.
Secure Boot
Enable Secure Boot Enables secure boot using only validated boot software.
Default: OFF
Enable Microsoft UEFI CA Enables UEFI CA to be included in the BIOS UEFI Secure Boot DB.
Default: ON
Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Expert Key Management
Enable Custom Mode Allows the PK, KEK, db, and dbx security key databases to be modified.
BIOS Setup 91
To Next Page
Loading...
