Removing and installing coin-cell battery
Removing the coin-cell battery
WARNING: This computer contains a coin-cell battery and requires trained technicians for handling guidance.
CAUTION: Removing the coin-cell battery clears the CMOS and reset BIOS settings.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
Figure 10. Removing the coin-cell battery
Steps
1. Place the computer on its side with the left side facing up.
2. Using a plastic scribe, push the coin-cell battery securing-clip on the coin-cell battery socket to release the coin-cell battery.
3. Remove the coin-cell battery from the system board.
5
Removing and installing coin-cell battery 31
To Next Page
Loading...
