5. Slide and remove the wireless card at an angle from the wireless-card slot.
Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Figure 21. Installing the wireless card
Steps
1. Connect the antenna cables to the wireless card.
Table 22.
Antenna-cable color scheme
Connectors on the
wireless card
Antenna-cable color Silkscreen marking
Main White MAIN △ (white triangle)
Removing and installing Customer Replaceable Units (CRUs) 43
To Next Page
Loading...
