Dell Inspiron 3030 - Media-Card Reader Replacement

Figure 33. Installing the fan shroud
Steps
1. Place the fan shroud on the fan and heat-sink assembly.
2. Press the fan shroud against the fan and heat sink assembly to snap the fan shroud in place.
3. Place the computer in an upright position.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Media-card reader
Removing the media-card reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
Removing and installing Customer Replaceable Units (CRUs)
57