Figure 31. Installing the optical-drive bezel
Steps
1. Align the tabs on the optical-drive bezel with the slots on the optical drive and snap it in place.
2. Slide the optical-drive tray into the optical drive and close it.
Next steps
1. Install the optical drive.
2. Install the front cover.
3. Install the left-side cover.
4. Follow the procedure in After working inside your computer.
Fan shroud
Removing the fan shroud
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following image indicates the location of the fan shroud and provides a visual representation of the removal procedure.
Removing and installing Customer Replaceable Units (CRUs)
55
To Next Page
Loading...
