Installing the coin-cell battery
WARNING: This computer contains a coin-cell battery and requires trained technicians for handling guidance.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Figure 11. Installing the coin-cell battery
Steps
1. Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
2. Place the computer in an upright position.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
32
Removing and installing coin-cell battery
To Next Page
Loading...
