Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
Figure 20. Removing the wireless card
Steps
1. Place the computer on its side with the left side facing up.
2. Remove the screw (M2x4) that secures the wireless card to the system board.
3. Slide and lift the wireless-card bracket off the wireless card.
4. Disconnect the antenna cables from the wireless card.
42
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
