Place the palm-rest and keyboard assembly on a at surface.
NOTE: Antenna cables are a part of the display back-cover for computers shipping with WWAN conguration.
1 Install the touchpad.
2 Install the power-adapter port.
3 Install the power button with ngerprint reader or power-button board, whichever applicable.
4 Install the display assembly.
5 Install the system board.
6 Install the speakers.
7 Install the WLAN card.
8 Install the battery.
9 Install the base cover.
10 Follow the procedure in After working inside your computer.
Removing and installing components
65
To Next Page
Loading...
