c. keyboard trim
d. keyboard
e. palmrest
3. Remove the screws that secure the display-hinge covers to the computer.
4. Perform the following steps as shown in the illustration:
a. Remove the screws that secure display-hinge covers to the computer [1].
b. Remove the display-hinge covers from the computer [2].
Installing the Display-Hinge Cover
1. Place the display-hinge covers on the system and tighten the screws to secure the display-hinge
covers to the computer.
2. Tighten the screws to secure the display-hinge covers at the back of the computer.
3. Install:
a. palmrest
b. keyboard
c. keyboard trim
d. base cover
28
To Next Page
Loading...
