About this task
The following image indicates the location of the front bezel and provides a visual representation of the installation procedure.
Steps
1. Position the front bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Hard-drive assembly
Removing the primary 2.5-inch hard-disk drive assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the 2.5-inch hard-disk drive assembly and provide a visual representation of the removal
procedure.
22
Disassembly and reassembly
To Next Page
Loading...
