Removing and installing coin-cell battery
Removing the coin-cell battery
WARNING: This computer contains a coin-cell battery and requires trained technicians for handling guidance.
CAUTION: Removing the coin-cell battery will clear the CMOS and will reset BIOS settings.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal
procedure.
Figure 13. Removing the coin-cell battery
Steps
1. Push the coin-cell battery-release lever on the coin-cell battery socket to release the coin-cell battery.
2. Lift the coin-cell battery from the coin-cell battery socket.
Installing the coin-cell battery
WARNING: This computer contains a coin-cell battery and requires trained technicians for handling guidance.
6
Removing and installing coin-cell battery 35
To Next Page
Loading...
