7. Install the speaker.
8. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever is applicable.
9. Install the coin-cell battery.
10. Install the side cover.
11. Follow the procedure in After working inside your computer.
Internal antenna
Removing the antenna module (white cable)
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
About this task
The following image(s) indicate the location of the antenna module (white cable) and provides a visual representation of the
removal procedure.
Removing and installing Field Replaceable Units (FRUs)
73
To Next Page
Loading...
