Dell OptiPlex Micro Plus 7020 - Page 70

Figure 47. System board connectors
1. M.2 WLAN connector (M.2 WLAN)
2. M.2 SSD PCIe connector (M.2 2230 or M.2 2280) (M.2 PCIe SSD-1)
3. Coin-cell battery
4. Optional video connector (VGA Port/DisplayPort 1.4a (HBR3)/HDMI 2.1 Port) (VIDEO)
5. Optional connector (USB 3.2 Gen 2 Type-C Port) (TYPE-C)
6. Optional PS/2, serial port connector (KB MS SERIAL)
7. Processor socket (CPU)
8. Fan connector (FAN CPU)
9. Internal speaker connector (INT SPKR)
10. Memory-module slots (DIMM1 and DIMM2)
11. M.2 SSD PCIe connector (M.2 2230 or M.2 2280) (M.2 PCIe SSD-0)
The following image(s) indicate the location of the system board and provides a visual representation of the installation
procedure.
70
Removing and installing Field Replaceable Units (FRUs)