Supports an optional external antenna module.
2. One optional I/O module port
Supports an optional I/O module with one of the following ports:
● HDMI 2.1
● DisplayPort 1.4a (HBR3)
● PS2
● USB Type-C with DisplayPort Alt mode and Power Delivery
● VGA
● Serial
NOTE: You may connect a 90 W Dell USB-C hub monitor to the optional Type-C port as a consolidated power, display,
and USB I/O solution for your computer.
3. DC-in cable clip
Use for routing the power-adapter cable.
4. USB 3.2 Gen 1 (5 Gbps) port with Smart Power On
Connect devices such as external storage devices and printers. Supports data transfer speeds up to 5 Gbps.
NOTE: When USB wake is enabled in the BIOS, the computer will power on or wake from hibernation when a USB
mouse or keyboard that is connected to this port is used.
5. Kensington security-cable slot and padlock ring
Connect a security cable to prevent unauthorized movement of your computer and install a standard padlock to prevent
unauthorized access to the interior of your computer.
6. Power-adapter port
Connect a power adapter to provide power to your computer.
7. Service Tag label
The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware
components in your computer and access warranty information.
8. Three DisplayPort 1.4a ports
Connect an external display or a projector. Can support video outputs of up to 4096 x 2304 at 60 Hz.
9. Two USB 3.2 Gen 2 (10 Gbps) ports
Connect devices such as external storage devices and printers. Provides data transfer speeds up to 10 Gbps.
10. Network port
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access, with a transfer rate
of 10/100/1000 Mbps.
8
Views of OptiPlex Micro Plus 7020
To Next Page
Loading...
