Dell P62F - Audio Specifications; Video Specifications; Communication Specifications

Option Description
Password
Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled the setup options are locked by the admin password.
UEFI Capsule
Firmware
Updates
Allows to control whether this system allows BIOS updates via UEFI capsule update packages.
Default setting: Enable UEFI Capsule Firmware Updates is selected.
TPM 1.2/2.0
Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
● TPM On (enabled by default)
● Clear
● PPI Bypass for Enabled Commands
● PPI Bypass for Disabled Commands
● Activate
● Deactivate
NOTE: To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Computrace Allows you to activate or disable the optional Computrace software The options are:
● Deactivate
● Disable
● Activate
NOTE: The Activate and Disable options will permanently activate or disable the feature and no
further changes will be allowed
Default setting: Deactivate
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
Admin Setup
Lockout
Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Disabled
Secure Boot screen options
Option
Description
Secure Boot
Enable
This option enables or disables the Secure Boot feature.
● Disabled
● Enabled
Default setting: Enabled.
Expert Key
Management
Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable
Custom Mode option is disabled by default. The options are:
● PK
● KEK
● db
● dbx
If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear. The options are:
● Save to File—Saves the key to a user-selected file
● Replace from File—Replaces the current key with a key from a user-selected file
● Append from File—Adds a key to the current database from a user-selected file
●
Delete—Deletes the selected key
● Reset All Keys—Resets to default setting
System setup options 67