Dell P62F - Removing the Hard Drive Bracket; Installing the Hard Drive Bracket

Installing the hard drive cable
1. Connect the hard drive cable to the hard drive.
2. Install the:
a. hard drive
b. battery
c. back cover
3. Follow the procedure in After working inside your computer
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. back cover
b. battery
3. To remove the memory module:
a. Pull the retention clips from the memory module until it pops up. [1]
b. Remove the memory module from the connector on the system board. [2]
Removing and installing components
19