Dell P62F - 3 Removing and Installing Components; Recommended Tools; Removing the Back Cover

• Installing the palmrest
• Removing the power connector
• Installing the power connector
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
●
Small plastic scribe
Removing the back cover
1. Follow the procedures in Before working inside your computer.
2. Remove the screws that secure the back cover to the computer.
Figure 5. Removing screws
3. To remove the cover:
a. Using a scribe, pry the edges of the back cover from all sides [1].
b. Lift the back cover from the computer [2].
12
Removing and installing components