EasyManua.ls Logo

Dell P91G - Chapter 10: Removing the Solid-State Drive;Intel Optane; Prerequisites; Procedure

Dell P91G
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removing the solid-state drive/Intel Optane
memory module
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the In
tel Optane memory, see
Disabling Intel Optane memory.
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Prerequisites
Remove the base cover
.
Procedure
1 Locate the solid-state drive on your computer.
2 Remove the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
3 Slide and remove the solid-state drive from the solid-state drive slot.
10
Removing the solid-state drive/Intel Optane memory module 23

Table of Contents

Other manuals for Dell P91G

Related product manuals