Replacing the camera
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Adhere the tape and turn over the camera module.
3 Using the alignment post, adhere the camera to the display-panel assembly.
41
Replacing the camera 75
To Next Page
Loading...
