Dell P91G - Chapter 36: Removing the Palm Rest; Prerequisites; Procedure

Removing the palm rest
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Prerequisites
1 Remove the base cover
.
2 Remove the battery.
3 Remove the solid-state drive/Intel Optane memory module.
4 Remove the coin-cell battery.
5 Remove the wireless card.
6 Remove the speakers.
7 Remove the fan.
8 Remove the heat sink.
9 Remove the display assembly.
10 Remove the power-adapter port
.
11 Remove the I/O board.
12 Remove the power button with ngerprin
t reader.
13 Remove the system board
.
14 Remove the touchpad
.
15 Remove the keyboard.
Procedure
After performing the steps in prerequisites we are left with the palm rest.
36
Removing the palm rest 61