Dell P91G - Chapter 32: Removing the Touchpad; Prerequisites; Procedure

Removing the touchpad
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Prerequisites
1 Remove the base cover
.
2 Remove the battery.
3 Remove the speakers.
Procedure
1 Open the latch, and disconnect the touchpad cable from the system board.
2 Peel o the tapes that secure the touchpad assembly to the keyboard bracket.
3 Peel o the tape that secure the touchpad bracket to the palm-rest assembly.
4 Remove the three screws (M2x2) that secure the touchpad bracket to the palm-rest assembly.
5 Lift the touchpad bracket o the palm-rest assembly.
6 Remove the four screws (M2x2.5) that secure the touchpad to the palm-rest assembly.
7 Lift the touchpad, along with its cable, o
 the palm-rest assembly.
32
Removing the touchpad 53