EasyManua.ls Logo

Dell P91G - Chapter 12: Removing the Coin-Cell Battery; Prerequisites; Procedure

Dell P91G
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removing the coin-cell battery
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
CAUTION
: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note
the BIOS setup program’s settings before removing the coin-cell battery.
Prerequisites
1 Remove the base cover
.
2 Remove the fan.
Procedure
1 Disconnect the coin-cell battery cable from the system board.
2 Remove the coin-cell battery cable from the I/O-board cable.
3 Peel the coin-cell battery o the palm-rest assembly.
12
28 Removing the coin-cell battery

Table of Contents

Other manuals for Dell P91G

Related product manuals