1096 Configuring DHCPv6 Server and Relay Settings
Configuring the DHCPv6 Server and Relay (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the DHCPv6 server on a
PowerConnect 8000/8100-series switch. For details about the fields on a page,
click at the top of the page.
DHCPv6 Global Configuration
Use the Global Configuration
page to configure DHCPv6 global parameters.
To display the page, click Routing
→
IPv6
→
DHCPv6
→
Global
Configuration in the navigation panel.
Figure 39-2. DHCPv6 Global Configuration
To Next Page
Loading...
