EasyManua.ls Logo

Dell PowerConnect 8132 - USB Port (Power Connect 8100-Series Switches Only); Port and System Leds; Powerconnect 8000-Series and 8100-Series Back Panel

Dell PowerConnect 8132
1294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
94 Hardware Overview
USB Port (Power Connect 8100-series switches only)
The Type-A, female USB port supports a USB 2.0-compliant flash memory
drive. The PowerConnect switch can read or write to a flash drive formatted
as FAT-32. You can use a USB flash drive to copy switch configuration files
and images between the USB flash drive and the switch. You can also use the
USB flash drive to move and copy configuration files and images from one
switch to other switches in the network.
The USB port does not support any other type of USB device.
Port and System LEDs
The front panel contains light emitting diodes (LEDs) to indicate port status.
For information about the status that the LEDs indicate, see "LED
Definitions" on page 97.
PowerConnect 8000-series and 8100-series Back
Panel
•Console Port
Out-of-Band Management Port
Power Supplies
Ventilation System

Table of Contents

Other manuals for Dell PowerConnect 8132

Related product manuals