Dell PowerConnect 8132 User Manual

1150 Configuring Class-of-Service
Interface Configuration
Use the Interface Configuration page to define the interface shaping rate for
egress packets on an interface and the decay exponent for WRED queues
defined on the interface.
Each interface CoS parameter can be configured globally or per-port. A global
configuration change is applied to all interfaces in the system.
To display the Interface Configuration page, click Quality of Service
→ Class
of Service
→ Interface Configuration in the navigation panel.
Figure 41-3. Interface Configuration

Dell PowerConnect 8132 Specifications

General

Brand	Dell
Model	PowerConnect 8132
Category	Switch
Language	English