Dell PowerEdge M630 - Page 39

3
Option Description
Option Description
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port E Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port F
Port G
Port H
Port I
Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.