38
SATA Settings details
The SATA Settings screen details are explained as follows:
Option Description
Embedded SATA Enables the embedded SATAoption to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI
by default.
Security Freeze
Lock
Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable
only for ATA and AHCI modes.
Write Cache
Enables or disables the command for Embedded SATA drives during POST.
Port A Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port B Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port C Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Port D Sets the drive type of the selected device. For Embedded SATAsettings in ATAmode, set this field to Auto
to enable BIOS support. Set it to OFF to turn off BIOS support.
For
AHCI
or
RAID
mode, BIOS support is always enabled.
Option Description
Model Specifies the drive model of theselected device.
Drive Type Specifies the type of drive attached to the SATA port.
To Next Page
Loading...
