Dell poweredge t330 - Installing the System Cover

Installing the system cover
Installing the system cover
Prerequisites
Ensure that you follow the Safety instructions.
Steps
1. Align the slots on the system cover with the tabs on the chassis.
2. Press the cover release latch, and push the cover toward the chassis until the latch locks into place.
3. Turn the cover release latch lock to the locked position.
Next steps
1. Place the system upright on its feet on a flat and stable surface.
2. If removed, install the front bezel.
3. Reconnect the system to the electrical outlet and peripherals.
4. Turn on the system and any attached peripherals.
Related Tasks
Installing the optional front bezel
57