Figure 18. Removing and installing the intrusion switch
1. intrusion switch slot 2. intrusion switch
3. intrusion switch cable 4. intrusion switch connector on the
system board
Next steps
1. Install the intrusion switch.
2. Follow the procedure listed in After working inside your system .
Related Tasks
Removing the cooling shroud
Installing the intrusion switch
Installing the intrusion switch
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
65
To Next Page
Loading...
