Figure 17. Removing and installing the cooling shroud
1. touch point (2) 2. t-handle post on the system board
3. guide pin on the cooling shroud 4. slot (2)
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in After working inside your system .
Related Tasks
Installing the cooling shroud
Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
CAUTION: Do not operate the system with the cover removed for a duration exceeding 5
minutes.
63
To Next Page
Loading...
