CPU Card Priority Card Type Slot Priority Maximum
Allowed
3 RAID (H330 ) 8, 1, 3 1
RAID (H730) 8 1
RAID (H730P) 8, 1, 3 1
RAID (H830) 3, 4, 6, 7, 1 2
4 40 Gb NICs 3, 4, 6, 7, 1 5
5 FC16 HBA 3, 4, 6, 7, 1 5
FC16 HBA (QLE2660 V2
and QLE2662 V2)
3, 4, 6, 7, 1 2
6 10 Gb NICs 3, 4, 6, 7, 1 5
10 Gb NIC (Emulex Dual
Port)
NOTE: The slot
priority for Emulex
V2 Dual Port is 3, 4,
6, 7, 1 and the
maximum number
of cards supported
is 5.
3, 4, 6, 7, 1 2
10 Gb NICs (Intel 10G
BASE-T Dual Port and
Broadcom 10G BASE-T
Dual Port)
4, 6, 7, 1, 3 5
7 FC8 HBA 3, 4, 6, 7, 1, 5, 2 7
9 1 Gb NICs 3, 4, 6, 7, 1, 5, 2 7
1 Gb NIC (Broadcom
Quad Port)
4, 7, 1, 3, 6 5
10 Non-RAID 3, 4, 6, 7, 1 5
Removing a expansion card
Prerequisites
1. Follow the safety guidelines listed in the safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the expansion card holder.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
126
To Next Page
Loading...
