Related Links
Safety instructions
Before working inside your system
GPU card holder (optional)
Removing the optional GPU card holder
Prerequisites
1. Follow the safety guidelines listed in the safety instructions section.
2. Follow the procedure listed in the Before working inside your system section
3. Remove the cooling shroud.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
Press the release tab and pull the GPU card holder out of the chassis.
Figure 57. Removing the GPU card holder
1. release tab 2. GPU card holder
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
129
To Next Page
Loading...
