Figure 18. Removing caster wheels
1. slots on base of the tower (4) 2. wheel assembly unit (2)
3. screw (2)
4. screw for support unit (2)
5. support unit
Related Links
Safety instructions
Installing caster wheels
Installing caster wheels
Prerequisites
1. Follow the safety guidelines listed in the safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Place the system on its side on a flat, stable surface with the base of the system extending off the
edge of the surface.
4. If installed, remove the system feet. For more information, see the Removing system feet section.
80
To Next Page
Loading...
