Dell PowerEdge T630 - Page 134

7.
Figure 60. Installing a GPU card
1. expansion card latch (2) 2. GPU card
3. SLI data connector 4. GPU card power connector
5. GPU card power connector 6. x16 connector
Steps
1. Locate the x16 slot on the system board.
2. Insert the GPU card into the slot.
3. Connect the cables to the GPU card.
4. Close the two expansion card latches.
Next steps
1. Install the expansion card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related Links
After working inside your system
Installing the cooling shroud
Installing the expansion card holder
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing an optional GPU card
Removing the expansion card holder
134