Dell poweredge VRTX - Configuring CMC Command Line Consoles

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
CMC8540
Message The CMC
arg1 is turned on.
Arguments
•
arg1 =
slot id
Detailed
Description
The CMC specified in the message is turned on because of a CMC insertion or due to chassis
AC power on.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
CMC8541
Message The watchdog has reset the CMC
arg1 .
Arguments
•
arg1 =
slot id
Detailed
Description
The CMC specified in the message was reset by a watchdog event.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
123