Dell poweredge VRTX - Mem1001; Mem1002

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM1001
Message Memory device at location
arg1 failed to transition to a running state.
Arguments
•
arg1 =
location
Detailed
Description
None
Recommended
Response Action
Re-install the memory component. If the problem continues, contact support.
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Memory device <location> failed to transition to a running state. Reseat memory
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM1002
Message Memory device at location
arg1 is in test.
Arguments
•
arg1 =
location
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
384