Dell poweredge VRTX - Mem8000; Mem8001

Detailed
Description
The memory may not be operational. This an early indicator of a possible future uncorrectable
error.
Recommended
Response Action
Re-install the memory component. If the problem continues, contact support.
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Correctable memory error rate exceeded for <location>. Reseat memory.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM8000
Message Correctable memory error logging disabled for a memory device at location
arg1 .
Arguments
• arg1 = location
Detailed
Description
Errors are being corrected but no longer logged.
Recommended
Response Action
Review system logs for memory exceptions. Re-install memory at location <location>
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message SBE log disabled on <location>. Reseat memory
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM8001
Message Persistent correctable memory error logging enabled for a memory device at location
arg1 .
Arguments
•
arg1 =
location
379