Dell poweredge VRTX - Pdr1024; Pdr1025

Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR1024
Message Drive mismatch detected for drive
arg1 in disk drive bay arg2 .
Arguments
•
arg1 =
number
•
arg2 =
bay
Detailed
Description
The installed disk does not meet the array requirements, for example a SATA disk may not
operate in an array containing SAS drives.
Recommended
Response Action
Verify the disk meets the array requirements.
Category System Health
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Drive mismatch detected for drive <number> in bay <bay>. Install correct drive type
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR1025
Message Drive mismatch corrected for drive
arg1 in disk drive bay arg2 .
494