Dell poweredge VRTX - Swu8525; Swu8526

SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8525
Message Unable to update the iDRAC firmware on the server in slot
arg1 . The firmware update timeout
limit is exceeded.
Arguments
•
arg1 =
slot number
Detailed
Description
The firmware update operation is not successful. The update process was not completed
within the firmware update timeout duration.
Recommended
Response Action
Retry the operation. If the issue persists, contact your service provider.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8526
Message The firmware update operation of the iDRAC on the server in slot
arg1 is initiated.
Arguments
•
arg1 =
slot number
Detailed
Description
The firmware update operation of iDRAC identified in the message is initiated.
799