Dell poweredge VRTX - Fan8502; Fan1001

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN8502
Message The blower
arg1 is not detected, because it may not be operating optimally. Check for the
availability of latest CMC firmware.
Arguments
•
arg1 =
name
Detailed
Description
The current CMC firmware did not detect the blower identified in the message. To resolve the
issue, update the firmware. If the issue persists, contact your service provider.
Recommended
Response Action
Make sure that CMC is using the latest firmware, and then retry the operation.
Category Audit
SubCategory FAN = Fan Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN1001
Message
arg1 has been inserted.
Arguments
•
arg1 =
Fan Sensor Name
Detailed
Description
The enclosure detected that a fan was inserted.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory FAN = Fan Event
Severity Severity 3 (Informational)
Trap/EventID 4203
LCD Message No LCD message display defined.
230