Dell poweredge VRTX - Pdr1022; Pdr1007

Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Drive <number> in disk drive bay <bay> is in the failed array. Replace drive.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR1022
Message Drive
arg1 in disk drive bay arg2 is no longer in the failed array.
Arguments
•
arg1 =
number
•
arg2 =
bay
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR1007
Message Rebuild is in progress for drive
arg1 in disk drive bay arg2 .
Arguments
•
arg1 =
number
•
arg2 =
bay
Detailed
Description
None
Recommended
Response Action
No response action is required.
492