Dell poweredge VRTX - Swu8544; Swu8545

Recommended
Response Action
Make sure that the CMC firmware image file is available at the location specified in the
oepration, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8544
Message Unable to update the Standby CMC firmware because the Standby CMC could not be prepared
for firmware update.
Detailed
Description
The firmware update operation of the Standby CMC was not successful. The Standby CMC
could not be prepared for firmware update.
Recommended
Response Action
Retry the firmware update operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8545
Message Unable to update the Standby CMC firmware.
Detailed
Description
The firmware update operation of the Standby CMC was not successful.
Recommended
Response Action
Retry the update operation.
Category Updates
808