Dell poweredge VRTX - Swu8550; Swu8551

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8550
Message Unable to update the firmware of Standby CMC and Active CMC.
Detailed
Description
The firmware update process of Active CMC and Standby CMC was not successful.
Recommended
Response Action
Reacquire the Image file from the source location, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8551
Message Unable to update the firmware of Active CMC. The checksum process was not successful.
Detailed
Description
The firmware update process of Active CMC was not successful, because of a firmware image
checksum error.
Recommended
Response Action
Reacquire the Image file from the source location, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
811