Detailed
Description
A chassis-wide switch configuration image is applied to the first node of a multi-node sled
upon insertion or chassis initialization and has failed.
Recommended
Response Action
Make sure the sled has an updated iDRAC firmware.
Category Audit
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID 8362
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
814
To Next Page
Loading...
