Dell PowerVault ME5 Series - Page 33

Table 14. Common controller module LEDs (continued)
LED Description Color Status
None Off—Not connected or link is down
The following figure shows the host port LEDs on a 32Gb/s Fibre Channel controller module:
Figure 34. 32Gb/s Fibre Channel ports
LED Description Color Status
Fibre Channel link activity Green On—Connected, link is up
Flashing—Link activity
Off—Not connected or link is down
The following figure shows the host port LEDs on a 25 GbE iSCSI controller module:
Figure 35. 25 GbE iSCSI ports
LED
Description Color Status
iSCSI link activity Green On—Connected, link is up
Flashing—Link activity
Off—Not connected or link is down
The following figure shows host port LEDs on a 10Gbase-T iSCSI controller module:
Figure 36. 10Gbase-T iSCSI ports
LED
Description Color Status
iSCSI 10Gbase-T link speed Green On—10GbE link speed
Amber On—1GbE link speed
None Off—Not connected or link is down
ACT iSCSI 10Gbase-T link
activity
Green On—Connected, link is up
Flashing—Link activity
Off—Not connected or link is down
The following figure shows the host port LEDs on a 12 Gb/s SAS controller module:
Troubleshooting and problem solving
33