Table 28. Event descriptions and recommended actions (continued)
Number Severity Description/Recommended actions
Recommended actions:
● No action is required.
249 Info. After a valid license is installed, this event is logged for each licensed feature to show the new
license value for that feature. The event specifies whether the feature is licensed, whether the
license is temporary, and whether the temporary license is expired.
Recommended actions:
● No action is required.
250 Warning A license could not be installed.
The license is invalid or specifies a feature that is not supported on your product.
Recommended actions:
● Review the readme file that came with the license. Verify that you are trying to install the
license in the system that the license was generated for.
251 Info. A volume-copy operation has started for the indicated source volume.
Do not mount either volume until the copy is complete (as indicated by event 268).
Recommended actions:
● No action is required.
253 Info. A license was uninstalled.
Recommended actions:
● No action is required.
255 Info. The PBCs across controllers do not match as PBC from controller A and PBC from controller B
are from different vendors.
This may limit the available configurations.
Recommended actions:
● No action is required.
257 Info. The indicated snapshot has been prepared and committed and is ready for use.
Recommended actions:
● No action is required.
259 Info. In-band CAPI commands have been disabled.
Recommended actions:
● No action is required.
260 Info. In-band CAPI commands have been enabled.
Recommended actions:
● No action is required.
261 Info. In-band SES commands have been disabled.
Recommended actions:
● No action is required.
262 Info. In-band SES commands have been enabled.
Recommended actions:
● No action is required.
263 Warning The indicated spare disk is missing. Either it was removed or it is not responding.
Recommended actions:
96 Events and event messages
To Next Page
Loading...
